PowerScaleOneFS CLI Command Reference

Syntax

isi healthcheck evaluations run <checklist>
            [--override-pass <item>:<pass_status>]
            [--override-fresh <item>:<freshness>]
            [--override-thresholds <item>:<critical>:<warning>:<ok>]
            [--parameter <name>:<value>]
            [--email <string>]
            [--email-fail <string>]
            [--email-host <string>]
            [--email-port <integer>]
            [--email-user <string>]
            [--email-pass <string>]
            [--email-security <string>]
            [{--verbose | -v}]
            [{--help | -h}]

Required Privileges

ISI_PRIV_SYS_SUPPORT

Options

<checklist>

The name of the HealthCheck checklist you want to evaluate.

--override-pass <item>:<pass-status>

Overrides the pass status for an item, for example client_count:WARNING. You can specify this option for multiple items.

--override-fresh <item>:<freshness>

Overrides the freshness requirement, for example client_count:7200. You can specify this option for multiple items. The option suggests that a day or hour delimiter is accepted but actually only seconds are accepted.

--override-thresholds <item>:<critical>:<warning>:<ok>

Specify values, consisting of three digits, representing the lower-bound values for critical, warning, and OK statuses. For example, client_count:10:20:30. You can specify this option for multiple values for an item.

--parameter <name>:<value>

The parameter name and value for a specified item that you are evaluating. You can specify multiple parameter names and values if necessary.

--email<string>

Destination address for evaluation reports. Use ADMIN to send to cluster primary contact email. Specify --email for each additional destination address for evaluation reports.

--email-fail<string>

Destination address for evaluation failure reports. Use ADMIN to send to cluster primary contact email. If neither email nor email_fail is used then results will not be delivered. Specify --email-fail for each additional destination address for evaluation failure reports.

--email-host<string>

SMTP relay host, optional.

--email-port<integer>

SMTP relay port, optionally used with email_host only.

--email-user<string>

SMTP authentication user, optionally used with email_host only.

--email-pass<string>

SMTP authentication password, optionally used with email_host only.

--email-security<string>

SMTP security STARTTLS or NONE, optionally used with email_host only.

{--verbose | -v}

Displays more detailed information.

{--help | -h}

Displays help for this command.