PowerScaleOneFS CLI Command Reference

Syntax

isi network groupnets create <id> 
  [--description <string>]
  [--dns-cache-enabled {true | false}]
  [--dns-search <domain name>]
  [--dns-servers <ip address>]
  [--dns-options <string>]
  [--server-side-dns-search {true | false}]
  [--allow-wildcard-subdomains {true | false}]
  [--verbose | -v]

Options

<id>

Specifies a unique ID for the groupnet. The ID can be up to 32 alphanumeric characters long and can include underscores or hyphens, but cannot include spaces or other punctuation. The ID cannot exceed 32 characters.

--description <string>

Specifies an optional description of the groupnet. The description cannot exceed 128 bytes.

--dns-cache-enabled {true | false}

Specifies whether DNS caching for the groupnet is enabled. DNS caching is enabled by default.

--dns-search <domain name>

Sets the list of DNS search suffixes. Suffixes are appended to domain names that are not fully qualified. The list cannot contain more than six suffixes.

NOTE:Do not begin suffixes with a leading dot; leading dots are automatically added.

--dns-servers <ip address>

Sets a list of DNS IP addresses. Nodes issue DNS requests to these IP addresses. The list cannot contain more than three IP addresses.

--dns-options <string>

Sets the DNS resolver option. The only valid value for this option is rotate.

--server-side-dns-search {true | false}

Specifies whether server-side DNS searching is enabled, which appends DNS search lists to client DNS inquiries handled by a SmartConnect service IP address. Server-side search is enabled by default.

--allow-wildcard-subdomains {true | false}

If enabled, SmartConnect treats subdomains of known DNS zones, as the known DNS zone. This is required for S3 Virtual Host domains. Default setting is true.

{--verbose | -v}

Displays more detailed information.