PowerScaleOneFS CLI Command Reference

Syntax

isi event alerts modify <name>
        [--eventgroup <string>]
        [--clear-eventgroup]  
        [--add-eventgroup <string>]
        [--remove-eventgroup <string>]
        [--category <string>]
        [--clear-category]
        [--add-category <string>]
        [--remove-category <string>]
        [--channel | -c <string>]
        [--clear-channel]
        [--add-channel <string>]
        [--remove-channel <string>]
        [--severity {emergency | critical | warning | information}]
        [--clear-severity]
        [--add-severity {emergency | critical | warning | information}]
        [--remove-severity {emergency | critical | warning | information}]
        [--condition {NEW | NEW_EVENTS | ONGOING | SEVERITY_INCREASE| SEVERITY_DECREASE | RESOLVED}]
        [--limit <integer>]
        [--interval <duration>]
        [--transient <duration>]
        [--verbose | -v]

Options

<name>

Specifies the name of the alert you want to modify.

--eventgroup <string>...

Specifies the name of one or more eventgroups to alert on. Specify --eventgroupfor each additional eventgroup to alert on.

--clear-eventgroup

Clears the value for an eventgroup to alert on.

--add-eventgroup <string>...

Adds the name of one or more eventgroups to alert on. Specify --add-eventgroupfor each additional eventgroup to add.

--remove-eventgroup <string>...

Removes the name of one or more event groups to alert on. Specify --remove-eventgroupfor each additional eventgroup to remove.

--category (all | SYS_DISK_EVENTS | 100000000 | CPOOL_EVENTS | 1100000000 | NODE_STATUS_EVENTS | 200000000 |REBOOT_EVENTS | 300000000 | SW_EVENTS | 400000000 | QUOTA_EVENTS | 500000000 | SNAP_EVENTS | 600000000 |WINNET_EVENTS | 700000000 | FILESYS_EVENTS | 800000000 | HW_EVENTS | 900000000)...

Specifies the name of one or more eventgroup categories to alert on. Specify --categoryfor each additional eventgroup category.

--clear-category

Clears the list of eventgroup categories to alert on.

--add-category (all | SYS_DISK_EVENTS | 100000000 | CPOOL_EVENTS | 1100000000 | NODE_STATUS_EVENTS | 200000000 |REBOOT_EVENTS | 300000000 | SW_EVENTS | 400000000 | QUOTA_EVENTS | 500000000 | SNAP_EVENTS | 600000000 |WINNET_EVENTS | 700000000 | FILESYS_EVENTS | 800000000 | HW_EVENTS | 900000000)...

Adds the name of one or more eventgroup categories to alert on. Specify --add-category for each additional eventgroup category to add.

--remove-category (all | SYS_DISK_EVENTS | 100000000 | CPOOL_EVENTS | 1100000000 | NODE_STATUS_EVENTS | 200000000 |REBOOT_EVENTS | 300000000 | SW_EVENTS | 400000000 | QUOTA_EVENTS | 500000000 | SNAP_EVENTS | 600000000 |WINNET_EVENTS | 700000000 | FILESYS_EVENTS | 800000000 | HW_EVENTS | 900000000)...

Removes the name of one or more eventgroup categories to alert on. Specify --remove-category for each additional eventgroup category to remove.

{--channel | -c} <string>...

Specifies the name of one or more channels over which to deliver the alert. Specify --channel to spcify additional channels.

--clear-channel

Clears the list of channels over which to deliver the alert.

--add-channel <string>...

Adds the name of one or more channels to deliver the alert over. Specify --add-channel for each additional channel to add.

--remove-channel <string>...

Removes the name of one or more channels to deliver the alert over. Specify --remove-channel for each additional channel to remove.

--severity {emergency | critical | warning | information}

Specifies the event severity that the alert will report on. Severity values are case sensitive. Specify --severity for each additional alerts.

--clear-severity

Clears all severity filters for an alert.

--add-severity {emergency | critical | warning | information}

Adds another severity value for an alert to report on. Specify --add-severity for each additional severity to add.

--remove-severity {emergency | critical | warning | information}

Removes a severity value that an alert is reporting on. Specify --remove-severity for each additional severity to remove.

--condition {NEW | ONGOING | SEVERITY_INCREASE | SEVERITY_DECREASE | NEW_EVENTS | RESOLVED}

Specifies the condition under which alert is sent.

Condition values are case sensitive. The following values are valid:

NEW

Reports on eventgroup occurrences that have never been reported on before.

ONGOING

Provides periodic reports on eventgroup occurrences that have not been resolved.

SEVERITY_INCREASE

Reports on eventgroup occurrences whose severity has increased since the eventgroup was last reported on.

SEVERITY_DECREASE

Reports on eventgroup occurrences whose severity has decreased since the eventgroup was last reported on.

NEW_EVENTS

Reports on eventgroup occurrences that are new since the eventgroup was last reported on.

RESOLVED

Reports on eventgroup occurrences that have been resolved since the eventgroup was last reported on.

--limit <integer>

Sets the maximum number of alerts that can be sent. Applies only to the NEW_EVENTS alert condition.

--interval <integer>

Sets the time period between reports for ongoing alerts. Applies only to the ONGOING alert condition.

The following <integer> values are valid:

Y

Specifies years

M

Specifies months

W

Specifies weeks

D

Specifies days

H

Specifies hours

m

Specifies minutes

s

Specifies seconds

--transient <time>

Sets a minimum time that an eventgroup occurrence must exist before it is reported on. Any occurrence lasting less than the time period is considered transient and will not be reported.

The following <time> values are valid:

Y

Specifies years

M

Specifies months

W

Specifies weeks

D

Specifies days

H

Specifies hours

m

Specifies minutes

s

Specifies seconds

{--verbose | -v}

Displays more detailed information.