Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

PowerScaleOneFS CLI Command Reference

isi ipmi network modify

Modify the IPMI network configuration.

Syntax

isi ipmi network modify  
  [--gateway <ip address> ] 
  [--prefixlen <prefixlen>]
  [--ranges <ip_address_range>] 
  [--clear-ranges ]
  [--add-ranges <ip_address_range>] 
  [--remove-ranges <ip_address_range>]
  [--delete-config]
  [--force | -f]
  [--help | -h ]
  [--verbose | -v]
  

Options

Specify an IP address range using two IP addresses separated by a dash (-). The specified addresses are included in the range. For example:

92.168.0.100-192.168.100.100, 10.7.0.0-10.7.255.255
--gateway <IP address>
Specifies the IP address of the subnet gateway.
--prefixlen <prefix length>
Specifies the prefix length for this subnet.
--ranges <IP address range>
A list of IP address ranges in the pool. Specify --ranges for each additional IP address range.
--clear-ranges
Clear the list of IP address ranges.
--add-ranges <IP address range>
Add to the list of IP address ranges. Specify --add-ranges for each additional IP address range to add.
--remove-ranges <IP address range>
Remove items from the list of IP address ranges. Specify --remove-ranges for each additional IP address range to remove.
--delete-config
Remove the remote IPMI static network configuration.
{--force | -f}
Do not ask for confirmation before running this command.
{--help | -h}
Displays help for this command.
{--verbose | -v}
Displays more detailed information.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\