PowerScaleOneFS CLI Command Reference

Syntax

isi smb settings global modify
  [--access-based-share-enum {yes | no}]
  [--revert-access-based-share-enum]
  [--dot-snap-accessible-child {yes | no}]
  [--revert-dot-snap-accessible-child]
  [--dot-snap-accessible-root]
  [--revert-dot-snap-accessible-root]
  [--dot-snap-visible-child {yes | no}]
  [--revert-dot-snap-visible-child]
  [--dot-snap-visible-root {yes | no}]
  [--revert-dot-snap-visible-root]
  [--enable-security-signatures {yes | no}]
  [--revert-enable-security-signatures]
  [--guest-user <string>]
  [--revert-guest-user]
  [--ignore-eas {yes | no}]
  [--revert-ignore-eas]
  [--onefs-cpu-multiplier <integer>]
  [--revert-onefs-cpu-multiplier]
  [--onefs-num-workers <integer>]
  [--revert-onefs-num-workers]
  [--reject-unencrypted-access {yes | no}]
  [--revert-reject-unencrypted-access]
  [--require-security-signatures {yes | no}]
  [--revert-require-security-signatures]
  [--server-side-copy {yes | no}]
  [--revert-server-side-copy]
  [--server-string <string>]
  [--revert-server-string]
  [--support-multichannel {yes | no}]
  [--revert-support-multichannel]
  [--support-netbios {yes | no}]
  [--revert-support-netbios]
  [--support-smb2 {yes | no}]
  [--revert-support-smb2]
  [--support-smb3-encryption {yes | no}]
  [--revert-support-smb3-encryption]
  [--verbose| -v
  [--help| -h]

Required Privileges

ISI_PRIV_SMB

Options

--access-based-share-enum {yes | no}

Enumerates only the files and folders that the requesting user has access to.

--revert-access-based-share-enum

Sets the value to the system default for --access-based-share-enum.

--dot-snap-accessible-child {yes | no}

Specifies whether to make the /ifs/.snapshot directory visible in subdirectories of the share root. The default setting is no.

--revert-dot-snap-accessible-child

Sets the value to the system default for --dot-snap-accessible-child.

--dot-snap-accessible-root {yes | no}

Specifies whether to make the /ifs/.snapshot directory accessible at the share root. The default setting is yes.

--revert-dot-snap-accessible-root

Sets the value to the system default for --dot-snap-accessible-root.

--dot-snap-visible-child {yes | no}

Specifies whether to make the /ifs/.snapshot directory visible in subdirectories of the share root. The default setting is no.

--revert-dot-snap-visible-child

Sets the value to the system default for --dot-snap-visible-child.

--dot-snap-visible-root {yes | no}

Specifies whether to make the /ifs/.snapshot directory visible at the root of the share. The default setting is no.

--revert-dot-snap-visible-root

Sets the value to the system default for --dot-snap-visible-root.

--enable-security-signatures {yes | no}

Indicates whether the server supports signed SMB packets.

--revert-enable-security-signatures

Sets the value to the system default for --enable-security-signatures.

--guest-user <integer>

Specifies the fully qualified user to use for guest access.

--revert-guest-user

Sets the value to the system default for --guest-user.

--ignore-eas {yes | no}

Specifies whether to ignore EAs on files.

--revert-ignore-eas

Sets the value to the system default for --ignore-eas.

--onefs-cpu-multiplier <integer>

Specifies the number of OneFS worker threads to configure based on the number of CPUs. Valid numbers are 1-4.

--revert-onefs-cpu-multiplier

Sets the value to the system default for --onefs-cpu-multiplier.

--onefs-num-workers <integer>

Specifies the number of OneFS worker threads that are allowed to be configured. Valid numbers are 0-1024. If set to 0, the number of SRV workers will equal the value specified by --onefs-cpu-multiplier times the number of CPUs.

--revert-onefs-num-workers

Sets the value to the system default for --onefs-num-workers.

--reject-unencrypted-access {yes | no}

Rejects unencrypted client sessions.

--revert-reject-unencrypted-access

Sets the value to the system default for --reject-unencrypted-access.

--require-security-signatures {yes | no}

Specifies whether packet signing is required. If set to yes, signing is always required. If set to no, signing is not required but clients requesting signing will be allowed to connect if the --enable-security-signatures option is set to yes.

--revert-require-security-signatures

Sets the value to the system default for --require-security-signatures.

--server-side-copy {yes | no}

Enables or disables SMB server-side copy functionality. The default is yes.

--revert-server-side-copy

Sets the value to the system default for --server-side-copy.

--server-string <string>

Provides a description of the server.

--revert-server-string

Sets the value to the system default for --revert-server-string.

--support-multichannel {yes | no}

Specifies whether Multichannel for SMB 3.0 is enabled on the cluster. SMB Multichannel is enabled by default.

--revert-support-multichannel

Set the value of --support-multichannel back to the default system value.

--support-netbios {yes | no}

Specifies whether to support the NetBIOS protocol.

--revert-support-netbios

Sets the value to the system default for --support-netbios.

--support-smb2 {yes | no}

Specifies whether to support the SMB 2.0 protocol. The default setting is yes.

--revert-support-smb2

Sets the value to the system default for --support-smb2.

--support-smb3-encryption {yes | no}

Enables SMBv3 encryption on the cluster. The default setting is no.

--revert-support-smb3-encryption

Sets the value to the system default for --support-smb3-encryption.

{--verbose | -v}

Displays more detailed information.

--help | -h

Display help for this command.