PowerScaleOneFS CLI Command Reference

Syntax

isi diagnostics netlogger start 
  [--interfaces <interface>]
  [--count <integer>]
  [--duration <duration>]
  [--snaplength <bytes>]
  [--nodelist <LNN>]
  [--clients <IP>]
  [--ports <string>]
  [--protocols {ip | ip6 | arp | tcp | udp}]

Options

--interfaces <interface>

Specifies the network interface on which to capture traffic.

--count <integer>

Specifies the number of capture files that you will keep after the capture finishes. The default value is three files.

--duration <duration>

Specifies how long you will capture IP traffic for each capture file, in the format <integer>{Y|M|W|D|H|m|s}

--snaplength <bytes>

The snap length for the capture. Default is 320 bytes. Valid range for this value is 64-9100.

--nodelist <nodes>

Specifies nodes to report statistics on. Specify nodes by Logical Node Number (LNN). Multiple values can be specified in a comma-separated list, for example, --nodes 1,2. The default value is all.

--clients <clients>

Specifies client IPs to report statistics on. Multiple IP addresses can be specified in a comma-separated list. The default value is all.

--ports <port>

Specifies TCP or UDP ports to report statistics on. Multiple ports can be specified in a comma-separated list. The default value is all.

--protocols {ip | ip6 | arp | tcp | udp}

Specifies a protocol to report statistics on.