PowerScaleOneFS CLI Command Reference

Syntax

You can view the current parameters of any job type by using the isi job types view command.

isi job types modify <id>
  [--enabled <boolean>] 
  [--policy  <string>]
  [--schedule<string>] 
  [--priority <integer>]
  [--clear-schedule]

Options

<id>

Specifies the job type to modify.

--enabled <boolean>

Specifies whether the job type is enabled or disabled.

--policy<string>

Sets the policy for the specified job type.

--schedule <string>

Sets a recurring date pattern to run the specified job type.

--priority<integer>

Sets the priority level for the specified job type. Job types have a priority value between 1 and 10, with 1 being the highest priority and 10 being the lowest.

--clear-schedule

Clears any schedule associated with the specified job type.

--force

Forces the modification without a confirmation message.

Examples

The following command adds a recurring schedule to the MultiScan command.

isi job types modify multiscan --schedule "Every Friday at 22:00" 

When you run this command, the system prompts you to confirm the change. Type yes or no, and then press ENTER.