PowerScaleOneFS CLI Command Reference

Syntax

isi s3 settings zone modify
    [--root-path <path>]
    [--revert-root-path]
    [--base-domain <string>]
    [--object-acl-policy (replace | deny)]
    [--bucket-directory-create-mode <integer-octal>]
    [--use-md5-for-etag <boolean>]
    [--validate-content-md5 <boolean>]
    [--zone <string>]
    [{--verbose | -v}]

Options

[--root-path <path> ]

Root path for the S3 buckets. The root path must be within access zone base path.

--revert-root-path

Sets a value to the system default for --root-path.

[--base-domain <string> ]

Base domain is used to indicate the domain name portion of the object address where virtual host style addressing is used and allows OneFS to determine the bucket name.

[--object-acl-policy (replace | deny)]

Default object ACL policy for new S3 buckets in this zone.

[--bucket-directory-create-mode <integer-octal >]

The permission mode to create a bucket directory. It is expressed in octal.

[--use-md5-for-etag<boolean>]

Uses MD5 for Etag on upload.

--validate-content-md5<boolean>]

Validates given Content-MD5.

--zone <string>

Name of the access zone.

{--verbose | -v}

Displays more detailed information.