PowerScaleOneFS CLI Command Reference

Syntax

isi network rules modify <id>
  [--description <string>]
  [--clear-description ]
  [--iface <node_interface>]
  [--name <string>]
  [--node-type {any | storage | accelerator | backup-accelerator}]
  [--revert-node-type ]
  [--verbose]

Options

<id>

Specifies the ID of the provisioning rule to be modified. Specify the rule ID in the following format:

<groupnet_name>.<subnet_name>.<pool_name>.<rule_name>

The groupnet name is optional if referring to the default groupnet0. Colons are also acceptable as delimiters between component names—for example, groupnet0:subnet1:pool0:rule3.

--description <string>

Specifies an optional description of the provisioning rule. This option overwrites the existing description. The description cannot exceed 128 bytes.

--clear-description

Clears the description of the provisioning rule.

--iface <node_interface>

Specifies the network interface name the rule applies to. This option overwrites the existing interface name.

--name <string>

Specifies a new name for the rule. The new rule name must be unique in the pool.

--node-type {any | storage | accelerator | backup-accelerator}

Sets the provisioning rule to apply to one or more of the specified type of node. The default node type is any.

--revert-node-type

Sets the value of --node-type to the system default value.

{--verbose | -v}

Displays more detailed information.