Dell Lasso Version 4.7.3 User's Guide

Manually Collecting Data For PowerVault Or EqualLogic Or Compellent FluidFS NAS Device

To collect information for PowerVault or EqualLogic FluidFS NAS device manually:

For PowerVault FluidFS NAS device, log in to PV FluidFS NAS and for EqualLogic FluidFS NAS device, log in to EQL FluidFS NAS using root privilege through SSH.
Run the command:
- diag start GeneralSystemDiagnostic for versions earlier than 2.0.
- system internal diagnostics run-general-diagnostic for version 3.0. To check the status of diagnostics command, run the command: system internal diagnostics list --CSV.
The output file is generated in the FTP site at ftp://<IPaddress>:44421 location.
In Windows Explorer window, type ftp://<username>@<IPaddress>:44421. For example, ftp://admin@10.10.25.21:44421.
Enter the password when prompted. The contents of the ftp site is displayed. You can access the collection file ( *.tar.gz) in the diagnostics/archive/results__diagnostic. GeneralSystemDiagnostic _XXXX (timestamp) directory for versions earlier than 2.0 and from ftp://172.25.172.10:44421/diagnostics/archive/GeneralSystemDiagnostic/ for version 3.0.
Example of a collection file for versions earlier than 2.0: diagnostic.GeneralSystemDiagnostic.25_07_2011-06_42_09.tar.gz

Example of a collection file for version 3.0: Summary.4084191070.21_03_2014-08_51_13.tar.gz
- NOTE: On SAN consisting of many devices, you may need to increase the time out value. By default, time out value for this device is 15 minutes. You can modify the value nas.timeout.value (in milliseconds) in the NAS.properties file available in the Lasso install directory.