- Notes, cautions, and warnings
- Introduction
- Installing And Uninstalling Lasso
- Security
- Using Lasso
- Prerequisites For Data Collection
- Running Lasso
- Lasso GUI —
Fields And Descriptions
- Welcome to Lasso
- Your Company Information
- Your Company Contacts
- Your Hardware Environment
- Your Hardware Environment: Storage Arrays
- Your Hardware Environment: Fibre Channel Switches
- Your Hardware Environment: Ethernet Switches
- Your Hardware Environment: Hosts
- Your Hardware Environment: Enclosures
- Your Hardware Environment: Enclosure Modules
- Your Hardware Environment: Management & Monitoring Software
- Your Hardware Environment: Wireless Controllers
- Device Collection
- Collection Process for Dell Compellent Devices
- Upload
- Confirmation
- Log Files
- Generated File Formats
- Viewing Reports
- Manual Collection
- Manually Collecting Data For Storage Arrays
- Manually Collecting Data For Attached Hosts
- Manually Collecting
Data For Ethernet and Nexus Switches
- Manually Collecting Data For Cisco Ethernet Device
- Manually Collecting Data For Cisco Nexus Device
- Manually Collecting Data For Brocade or PowerConnect B-Series And M8428K Switches
- Manually Collecting Data For PowerConnect Ethernet and Dell Networking Switches
- Manually Collecting Data For Force 10 and Dell Networking Switches
- Manually Collecting Data For Fibre Channel Switches
- Manually Collecting Data For Enclosures — M1000e
- Manually Collecting Data For Enclosure — VRTX
- Manually Collecting Data For Enclosure — PowerEdge FX2
- Manually Collecting Data For HITKIT Appliance Under VRTX
- Manually Collecting Data For SAN HQ DEVICE
- Manually Collecting Data For SCVMM 2008 and 2012
- Manually Collecting Data For PowerConnect Controller
- Manually Collecting Integrated Server Information Within VRTX
- Collecting Data Using CLI
- Troubleshooting
- Troubleshooting EMC Package Installation
- Troubleshooting Unix Host Collection
- Troubleshooting MD Series
- Troubleshooting Compellent Collections for SCOC Versions Prior to 6.6.x
- Troubleshooting Compellent Collections for SCOS Versions Later than 6.6.x
- Troubleshooting EqualLogic
- Troubleshooting Storage Processor
- Troubleshooting Switches
- Troubleshooting Ethernet Switch
- Troubleshooting Unix
- Troubleshooting Windows
- Troubleshooting Enclosures
- Troubleshooting HITKIT Collection
- Troubleshooting SAN HQ Device
- Troubleshooting PowerVault FluidFS NAS Collection
- Troubleshooting EqualLogic FluidFS NAS Collection
- Troubleshooting Celerra Collection
- Troubleshooting VMware Collection
- Troubleshooting PowerConnect Controller
- Troubleshooting Lasso Run As System Account
- Error Codes
- Use Case Scenario
- Frequently Asked Questions
- License
Dell Lasso Version 4.7.3 User's Guide
Viewing Reports
To view the
report, perform any of the following:
- After Lasso collects the information, on the Confirmation page select View Your SAN Configuration option and click Finish. Lasso tool is closed and the report is opened in the internet browser.
- Open the files that are saved at the default location c:\Users\<username>\Dell\Lasso\results\ or in the specified location. For information about the file formats, see Generated File Formats.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\