Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell Lasso Version 4.7.3 User's Guide

PDF

Your Hardware Environment: Ethernet Switches

In this page, select the type of Ethernet Switches in your SAN environment, enter the details, and click Continue.

Switches in your environment

Clicking the validation status image image next to the Ethernet Switch provides the validation status. If validation is successful, validation successful image image is displayed. Else, validation failed image image is displayed.

To edit the selected Ethernet Switch, click Edit available next to the Ethernet Switch. Update the required fields and click Update Switch to save the updates. Else, click Cancel.

To delete a Ethernet Switch, click Delete available next to the Ethernet Switch.

To verify Ethernet Switch(es) from the existing user configuration, select the required switch(es), and click Revalidate Selected Ethernet Switches .

Add/Modify Ethernet Switch information

To add or modify Ethernet Switch information, select the type of Ethernet Switch from the drop down list and enter the data in the required fields. Click Save New Ethernet Switch to save, display the information in the Switches in your environment section, and start validation of the Ethernet Switch. Else, click Cancel.

Table 1. Add/Modify Ethernet Switch information . Add/Modify Ethernet Switch information
FieldDescription
Type of Ethernet SwitchSelect from the following type of Ethernet Switch(es):
  • Auto-Detect — Select this option to automatically detect the device type, validate, and collect the Ethernet and FCoE switches information.
  • Cisco Ethernet
  • Cisco Nexus
  • PowerConnect — Select this for all types of PowerConnect Ethernet, B8000, and M8428K switches.
  • Brocade Ethernet — Select this for the Brocade B-Series switches.
  • Force10
  • Dell Networking
IP/hostnameEnter the IP address or the host name of the switch.
UsernameEnter the user name.
PasswordEnter the password.
Enable PasswordEnter the password.
Use this as the default Ethernet switch typeSelect this option to make the selected type of Ethernet switch as the default.
Save as the default Username & Password for additional Ethernet switches Select this option to save the user name and password authentication as default for additional ethernet switches.
  • NOTE: Username, Password, and Enable Password credentials are optional for Cisco Ethernet type of Ethernet Switches.

Click Previous to display the Your Hardware Environment page.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\