Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

bgp four-octet-as-support

Enable 4-byte support for the BGP process.

Syntax

bgp four-octet-as-support

To disable fast external fallover, use the no bgp four-octet-as-support command.

Defaults

Disabled (supports 2-Byte format)

Command Modes

ROUTER BGP

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

Routers supporting 4-Byte ASNs advertise that function in the OPEN message. The behavior of a 4-Byte router is slightly different depending on whether it is speaking to a 2-Byte router or a 4-Byte router.

When creating Confederations, all the routers in the Confederation must be 4- or 2-byte identified routers. You cannot mix them.

Where the 2-Byte format is from 1 to 65535, the 4-Byte format is from 1 to 4294967295. Both formats are accepted, and the advertisements reflect the entered format.

For more information about using the 2- or 4-Byte format, refer to the Dell Networking OS Configuration Guide .