Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

ecmp-group

Provides a mechanism to monitor traffic distribution on an ECMP link bundle. A system log is generated when the standard deviation of traffic distribution on a member link exceeds a defined threshold.

Syntax

ecmp-group { ecmp-group-id interface interface | link-bundle-monitor}

To remove the selected interface, use the ecmp-group no interface command.

To disable link bundle monitoring, use the ecmp-group no link-bundle-monitor command.

Parameters

ecmp-group ID	Enter the identifier number for the ECMP group. The range is from 2 to 64.
interface	Enter the following keywords and slot/port to add the interface to the ECMP group: 10-Gigabit Ethernet interface, enter the keyword `TenGigabitEthernet` then the slot/port information.
link-bundle-monitor	Enter the keywords `link-bundle-monitor` to enable link bundle monitoring.

Defaults

Off

Command Modes

CONFIGURATION
CONFIGURATION ECMP-GROUP

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.