Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

timeout login response

Specify how long the software waits for the login input (for example, the user name and password) before timing out.

Syntax

timeout login response seconds

To return to the default values, use the no timeout login response command.

Parameters

seconds

Enter a number of seconds the software waits before logging you out. The range is:

VTY: the range is from 1 to 30 seconds, the default is 30 seconds.
Console: the range is from 1 to 300 seconds, the default is 0 seconds (no timeout).
AUX: the range is from 1 to 300 seconds, the default is 0 seconds (no timeout).

Defaults

See the defaults settings shown in Parameters.

Command Modes

LINE

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
9.3(0.0)	Supported on the M I/O Aggregator.

Usage Information

The software measures the period of inactivity defined in this command as the period between consecutive keystrokes. For example, if your password is “password” you can enter “p” and wait 29 seconds to enter the next letter.