Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

logging coredump server

Designate a server to upload core dumps.

Syntax

logging coredump server { ipv4-address} username name password [ type] password

Parameters

{ ipv4-address }	Enter the server IPv4 address (A.B.C.D).
name	Enter a username to access the target server.
type	Enter the password type: Enter `0` to enter an unencrypted password. Enter `7` to enter a password that has already been encrypted using a Type 7 hashing algorithm.
password	Enter a password to access the target server.

Defaults

Crash kernel files are uploaded to flash by default.

Command Modes

CONFIGURATION

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.4.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

Because flash space may be limited, using this command ensures your entire crash kernel files are uploaded successfully and completely. Only a single coredump server can be configured. Configuration of a new coredump server over-writes any previously configured server.

NOTE: You must disable logging coredump before you designate a new server destination for your core dumps.

Related Commands

logging coredump – disables the kernel coredump