Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

debug ip bgp

Display all information on BGP, including BGP events, keepalives, notifications, and updates.

Syntax

debug ip bgp [ ip-address | peer-group peer-group-name] [in | out]

To disable all BGP debugging, use the no debug ip bgp command.

Parameters

ip-address	Enter the IP address of the neighbor in dotted decimal format.
peer-group peer-group-name	Enter the keywords `peer-group` then the name of the peer group to debug.
in	(OPTIONAL) Enter the keyword `in` to view only information on inbound BGP routes.
out	(OPTIONAL) Enter the keyword `out` to view only information on outbound BGP routes.

Command Modes

EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

To view information on both incoming and outgoing routes, do not include the in and out parameters in the debugging command. The in and out parameters cancel each other; for example, if you enter the debug ip bgp in command and then enter the debug ip bgp out command, you do not see information on the incoming routes.

Entering a no debug ip bgp command removes all configured debug commands for BGP.

Related Commands

debug ip bgp events — views information about BGP events.

debug ip bgp keepalives — views information about BGP keepalives.

debug ip bgp notifications — views information about BGP notifications.

debug ip bgp updates — views information about BGP updates.

show debugging — views enabled debugging operations.