Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

match metric

To match on a specified value, configure a filter.

Syntax

match metric metric-value

Parameters

metric-value

Enter a value to match. The range is from zero (0) to 4294967295.

Defaults

Not configured.

Command Modes

ROUTE-MAP

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Related Commands

match interface — redistributes routes that match the next-hop interface.

match ip address — redistributes routes that match an IP address.

match ip next-hop — redistributes routes that match the next-hop IP address.

match ip route-source — redistributes routes that match routes advertised by other routers.

match route-type — redistributes routes that match a route type.

match tag — redistributes routes that match a specific tag.