Omitir para ir al contenido principal
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

upgrade boot

Upgrade the bootflash image or bootselector image.

Syntax upgrade boot {all | bootflash-image | bootselector-image} stack-unit {0-5 | all} {booted | flash: |ftp: | tftp: | usbflash:} (A: | B:}
Parameters
all Enter the keyword all to change both the bootflash and bootselecter images.
bootflash-image Enter the keywords bootflash-image to change the bootflash image.
bootselector-image Enter the keywords bootselector-image to change the bootselector image.
0–5 Enter the keyword 0–5 to upgrade only the mentioned stack-unit.
all Enter the keyword all to upgrade all the member stack-units.
booted Enter the keyword booted to upgradefrom the current image in the M I/O Aggregator.
ftp: After entering the keyword ftp:, you can either follow it with the location of the source file in this form: //userid:password@hostip/filepath or press Enter to launch a prompt sequence.
tftp: After entering the keyword tftp:, you can either follow it with the location of the source file in this form: //hostlocation/filepath or press Enter to launch a prompt sequence.
flash: After entering the keyword flash:, you can either follow it with the location of the source file in this form: //filepath or press Enter to launch a prompt sequence.
usbflash: After entering the keyword usbflash:, you can either follow it with the location of the source file in this form: //filepath or press Enter to launch a prompt sequence.
A: Enter this keyword to upgrade the bootflash partition A.
B: Enter this keyword to upgrade the bootflash partition B.
Defaults none
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information

You must reload the Dell Networking OS after executing this command.

Example
Dell#upgrade boot ?
                                             all                 Upgrade both boot flash image and selector image
                                             bootflash-image     Upgrade boot flash image
                                             bootselector-image  Upgrade boot selector image
                                             Dell#
                                          

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"