Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

clear ip bgp ipv6 dampening

Clear information on route dampening and return suppressed route to active state.

Syntax

clear ip bgp ipv6 unicast dampening [ ipv6-address]

Parameters

ipv6-address

Enter the IPv6 address in the x:x:x:x::x format then the prefix length in the /x format. The range is from /0 to /128.

NOTE: The :: notation specifies successive hexadecimal fields of zeros.

Command Modes

EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

After you enter this command, the software deletes the history routes and returns the suppressed routes to the active state.