Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ipv6 ospf neighbor

Display the OSPF neighbor information on a per-interface basis.

Syntax

show ipv6 ospf neighbor [ interface]

Parameters

interface

(OPTIONAL) Enter the following keywords and slot/port or number information:

For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information.
For a Port Channel interface, enter the keywords port-channel then a number. The range is from 1 to 128.
For a VLAN, enter the keyword vlan then the VLAN ID. The range is 1 to 4094.

Defaults

none

Command Modes

EXEC

EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the M I/O Aggregator.