- Notes, cautions, and warnings
- Introduction
- Linux
- Overview—deployment steps and options
- Preparation for deployment
- Download installation packages—Linux
- Deploying PowerFlex with SELinux
- Prepare server operating systems for support of large-scale systems (up to 2048 SDCs)
- Prepare the DAX devices
- Install and configure the PowerFlex Gateway
- Install PowerFlex Gateway on Linux
- Install PowerFlex Gateway on Windows
- Configure PowerFlex Gateway properties
- Advanced and optional PowerFlex Gateway tasks
- Install the PowerFlex Gateway without assigning an admin password
- Reset PowerFlex Gateway password
- Store Tomcat's keystore password in the lockbox
- PowerFlex Gateway installation with a custom Java configuration
- Install Java on SUSE 12 servers
- Certificate management for PowerFlex Gateway
- Using SSH authentication on the PowerFlex Gateway
- Preparation tasks for SLES, Oracle Linux and Ubuntu
- Prepare the CSV file
- Clean the PowerFlex VMware environment
- Deploying PowerFlex using a non-root user
- Configure the OpenStack Nova Compute service
- Deploy PowerFlex
- Installation wizard
- Customizable installation using CSV file—hyper-converged system
- Customizable installation using CSV file—two-layer system
- Log in and upload installation packages
- Upload the CSV file
- Start the customized installation
- Complete the customized installation—two-layer system backend
- Install SDC on frontend servers
- Install the PowerFlex presentation server
- SDC (scini) driver configuration for SELinux
- Add components to a PowerFlex system—Linux
- VMware ESXi
- Overview—deployment steps
- Preparation for deployment
- Deploy PowerFlex using the vSphere PowerFlex plug-in
- Manually deploy PowerFlex on ESXi servers
- Manual Deployment of VxFlex OS on ESXi Servers
- Deploying the PowerFlex storage virtual machine (SVM)
- Manually install PowerFlex components on the SVMs
- Register the vSphere PowerFlex plug-in
- Install SDC on an ESXi server using the vSphere PowerFlex plug-in
- Install the SDC on an ESXi-based server and connect it to PowerFlex using esxcli
- Manually remove a VIB file from an ESXi host
- Add components to a PowerFlex system—ESXi
- PowerFlex Installer REST API
- PowerFlex VASA
- Post-deployment tasks
Deploy Dell PowerFlex v3.6.x
Deployment workflow—Linux
The PowerFlex deployment workflow on physical servers, and in non-VMware hyper-converged infrastructure (HCI) environments such as Citrix Hypervisor (XenServer) and KVM, is described in this summary.
For VxFlex Ready Node or VxRack Node 100 Series systems, refer to your product's Hardware Configuration and Operating System Installation Guide and Deployment Guide for step-by-step installation instructions on how to prepare the server and operating system prior to deployment of PowerFlex.
The main steps in the PowerFlex deployment workflow are:
- Prepare the environment.
- Start the deployment.
- Monitor the deployment.
- For some two-layer system configurations, install SDCs on external servers.
- Install the PowerFlex presentation server.
- Install the license.
- Perform mandatory, recommended, and optional post-deployment tasks.
- Move the system to production.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\