Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

In the Dell Networking OS, you can change the value of the LOCAL_PREFERENCE attribute.

1. Enter the ROUTE-MAP mode and assign a name to a route map. CONFIGURATION mode route-map map-name [permit | deny] [ sequence-number]
2. Change LOCAL_PREF value for routes meeting the criteria of this route map. CONFIG-ROUTE-MAP mode set local-preference value
3. Return to CONFIGURATION mode. CONFIG-ROUTE-MAP mode exit
4. Enter ROUTER BGP mode. CONFIGURATION mode router bgp as-number
5. Apply the route map to the neighbor or peer group’s incoming or outgoing routes. CONFIG-ROUTER-BGP mode neighbor { ip-address | peer-group-name} route-map map-name {in | out}