Ga naar hoofdinhoud
Uitloggen

Welkom bij Dell

Mijn account
  • Snel en eenvoudig bestellen
  • Bestellingen en de verzendstatus bekijken
  • Een lijst met producten maken en openen
  • Beheer uw Dell EMC locaties, producten en contactpersonen op productniveau met Company Administration.
Inloggen Een account maken Inloggen bij Premier Aanmelden voor partnerprogramma
Contact

Uw Dell.com-winkelwagentjes

Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

PDF

Setting Daylight Saving Time Once

Set a date (and time zone) on which to convert the switch to daylight saving time on a one-time basis.

To set the clock for daylight savings time once, use the following command.
Set the clock to the appropriate timezone and daylight saving time. CONFIGURATION mode clock summer-time time-zone date start-month start-day start-year start-time end-month end-day end-year end-time [ offset]
  • time-zone : Enter the three-letter name for the time zone. This name displays in the show clock output.
  • start-month : Enter the name of one of the 12 months in English. You can enter the name of a day to change the order of the display to time day month year.
  • start-day : enter the number of the day. The range is from 1 to 31. You can enter the name of a month to change the order of the display to time day month year.
  • start-year : enter a four-digit number as the year. The range is from 1993 to 2035.
  • start-time : enter the time in hours:minutes. For the hour variable, use the 24-hour format; example, 17:15 is 5:15 pm.
  • end-month : enter the name of one of the 12 months in English. You can enter the name of a day to change the order of the display to time day month year.
  • end-day : enter the number of the day. The range is from 1 to 31. You can enter the name of a month to change the order of the display to time day month year.
  • end-year : enter a four-digit number as the year. The range is from 1993 to 2035.
  • end-time : enter the time in hours:minutes. For the hour variable, use the 24-hour format; example, 17:15 is 5:15 pm.
  • offset : (OPTIONAL) enter the number of minutes to add during the summer-time period. The range is from 1 to 1440. The default is 60 minutes.

Example of the clock summer-time Command 

Dell(conf)#clock summer-time pacific date Mar 14 2012 00:00 Nov 7 2012 00:00
                                 Dell(conf)#

Beoordeel deze inhoud

Nauwkeurig
Nuttig
Eenvoudig te begrijpen
Was dit artikel nuttig?
0/3000 characters
  Geef een beoordeling (1-5 sterren).
  Geef een beoordeling (1-5 sterren).
  Geef een beoordeling (1-5 sterren).
  Selecteer of het artikel nuttig is of niet.
  Opmerkingen mogen geen speciale tekens bevatten: <>() \