Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

Example of Enabling GVRP on an Interface

Dell(conf-if-gi-1/21)#switchport
                                 Dell(conf-if-gi-1/21)#gvrp enable
                                 Dell(conf-if-gi-1/21)#no shutdown
                                 Dell(conf-if-gi-1/21)#show config
                                 !
                                 interface GigabitEthernet 1/21
                                 no ip address
                                 switchport
                                 gvrp enable
                                 no shutdown