Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

To examine the working efficiency of the LAG bundle interfaces, perform the following steps:

1. The functionality to detect the working efficiency of the LAG bundle interfaces is automatically activated on all the port channels, except the port channel that is configured as a VLT interconnect link, during the booting of the switch.
2. Use the show link-bundle-distribution port-channel interface-number command to display the traffic handling and utilization of the member interfaces of the port channel. The following sample output is displayed when you enter this show command. EXEC Dell#show link-bundle-distribution port-channel

   Dell#show link-bundle-distribution port-channel 1
                                       Link-bundle trigger threshold - 60
                                       
                                       LAG bundle - 1      Utilization[In Percent] - 0      Alarm State - Inactive
                                       
                                       Interface                Line Protocol   Utilization[In Percent]
                                       Te 0/5                   Up              0
                                       Te 0/7                   Up              0