Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

To configure an authentication method and method list, use the following commands.

1. Define an authentication method-list ( method-list-name ) or specify the default. CONFIGURATION mode aaa authentication login { method-list-name | default} method1 [ ... method4] The default method-list is applied to all terminal lines. Possible methods are:
   • enable: use the password you defined using the enable sha256-password, enable secret , or enable password command in CONFIGURATION mode. In general, the enable secret command overrules the enable password command. If you configure the enable sha256-password command, it overrules both the enable secret and enable password commands.
   • line: use the password you defined using the password command in LINE mode.
   • local: use the username/password database defined in the local configuration.
   • none: no authentication.
   • radius: use the RADIUS servers configured with the radius-server host command.
   • tacacs+: use the TACACS+ servers configured with the tacacs-server host command.
2. Enter LINE mode. CONFIGURATION mode line {aux 0 | console 0 | vty number [ ... end-number]}
3. Assign a method-list-name or the default list to the terminal line. LINE mode login authentication { method-list-name | default}