Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

aaa authentication enable

Configure AAA Authentication method lists for user access to EXEC privilege mode (the “Enable” access).

Syntax

aaa authentication enable {default | method-list-name} method [ ... method2]

To return to the default setting, use the no aaa authentication enable {default | method-list-name} method [ ... method2] command.

Parameters

default	Enter the keyword `default` then the authentication methods to use as the default sequence of methods for the Enable login. The default is `default enable`.
method-list-name	Enter a text string (up to 16 characters long) to name the list of enabled authentication methods activated at login.
method	Enter one of the following methods: `enable`: use the password the `enable password` command defines in CONFIGURATION mode. `line`: use the password the `password` command defines in LINE mode. `none`: no authentication. `radius`: use the RADIUS servers configured with the `radius-server host` command. `tacacs+`: use the TACACS+ server(s) configured with the `tacacs-server host` command.
... method2	(OPTIONAL) In the event of a “no response” from the first method, Dell Networking Operating System (OS) applies the next configured method.

Defaults

Use the enable password.

Command Modes

CONFIGURATION

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
9.3(0.0)	Supported on the M I/O Aggregator.

Usage Information

By default, the Enable password is used. If you configure aaa authentication enable default, Dell Networking Operating System (OS) uses the methods defined for Enable access instead.

Methods configured with the aaa authentication enable command are evaluated in the order they are configured. If authentication fails using the primary method, Dell Networking Operating System (OS) employs the second method (or third method, if necessary) automatically. For example, if the TACACS+ server is reachable, but the server key is invalid, Dell Networking OS proceeds to the next authentication method. The TACACS+ is incorrect, but the user is still authenticated by the secondary method.

Related Commands

enable password — changes the password for the enable command.

login authentication — enables AAA login authentication on the terminal lines.

radius-server host — specifies a RADIUS server host.

tacacs-server host — specifies a TACACS+ server host.