Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

neighbor peer-group passive

Enable passive peering on a BGP peer group; that is, the peer group does not send an OPEN message, but does respond to one.

Syntax

neighbor peer-group-name peer-group passive

To delete a passive peer-group, use the no neighbor peer-group-name peer-group passive command.

Parameters

peer-group-name

Enter a text string up to 16 characters long as the name of the peer group.

Defaults

Not configured.

Command Modes

ROUTER BGP

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

After you configure a peer group as passive, you must assign it a subnet using the neighbor subnet command.

Related Commands

neighbor subnet — assigns a subnet to a dynamically configured BGP neighbor.