Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ip rpf

View reverse path forwarding.

Syntax

show ip rpf

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2.(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

Network administrators use static mroutes to control the reach-ability of the multicast sources. If a PIM-registered multicast source is reachable using static mroute as well as unicast route, the distance of each route is examined and the route with shorter distance is the one the PIM selects for reach-ability.

NOTE: The default distance of mroutes is zero (0) and is CLI configurable on a per route basis.

Example

Dell#show ip rpf
                                             RPF information for 10.10.10.9
                                             RPF interface: Te 0/4
                                             RPF neighbor: 165.87.31.4
                                             RPF route/mask: 10.10.10.9/255.255.255.255
                                             RPF type: unicast