Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

logging facility

Configure the Syslog facility used for error messages sent to Syslog servers.

Syntax

logging facility [ facility-type]

To return to the default values, use the no logging facility command.

Parameters

facility-type

(OPTIONAL) Enter one of the following parameters:

auth (authorization system)
cron (Cron/at facility)
deamon (system deamons)
kern (kernel)
local0 (local use)
local1 (local use)
local2 (local use)
local3 (local use)
local4 (local use)
local5 (local use)
local6 (local use)
local7 (local use)
lpr (line printer system)
mail (mail system)
news (USENET news)
sys9 (system use)
sys10 (system use)
sys11 (system use)
sys12 (system use)
sys13 (system use)
sys14 (system use)
syslog (Syslog process)
user (user process)
uucp (Unix to Unix copy process)

The default is local7.

Defaults

local7

Command Modes

CONFIGURATION

Supported Modes

Full–Switch Mode

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Related Commands

logging — enables logging to a Syslog server.

logging on — enables logging.