Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

policy-map-output

Create an output policy map.

Syntax

policy-map-output policy-map-name

To remove a policy map, use the no policy-map-output policy-map-name command.

Parameters

policy-map-name

Enter the name for the policy map in character format (32 characters maximum).

Defaults

none

Command Modes

CONFIGURATION

Supported Modes

Programmable-Mux (PMUX)

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
9.2(0.0)	Introduced on the M I/O Aggregator.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

To assign traffic to different flows using QoS policy, use the Output Policy map. This command enables Policy-Map-Output Configuration mode (conf-policy-map-out).

Related Commands

service-queue — assigns a class map and QoS policy to different queues.

policy-aggregate — allows an aggregate method of configuring per-port QoS using policy maps.

service-policy output — applies an output policy map to the selected interface.