Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ip multicast-cam stack-unit

Displays content-addressable memory (CAM) entries.

Syntax

show ip multicast-cam stack-unit 0-5 port-set pipe-number [ ip-address mask [longer-prefixes] | detail | member-info | summary]

Parameters

0-5	Enter the stack-unit ID, from 0 to 5.
pipe-number	Enter the number of the Port-Pipe number. The range is from 0 to 0.
ip-address mask [longer-prefix]	(OPTIONAL) Enter the IP address and mask of a route to CAM entries for that route only. Enter the keyword `longer-prefixes` to view routes with a common prefix.
detail	Enter the keyword `detail` to display the group index ID used by the ecmp routes int he CAM.
member-info	Enter the keyword `member-info` to display the group index used by the ecmp, the number of egress ports (members) for the ecmp, and the port details of each member. The detail information under `member-info` will give the MAC address, VLAN ID and gateway of every member port of the ecmp.
summary	(OPTIONAL) Enter the keyword `summary` to view a table listing route prefixes and the total number routes which can be entered in to CAM.

Command Modes

EXEC
EXEC Privilege

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
8.3.17.0	Supported on the M I/O Aggregator.

Usage Information

The following describes the show ip fib stack-unit command shown in the following example.

Field	Description
Destination	Displays the destination route of the index.
CG	Displays 0.
V	Displays a 1 if the entry is valid and a 0 otherwise.
C	Displays the CPU bit. 1 indicates that a packet hitting this entry is forwarded to the control processor, depending on Egress port.
V Id	Displays the VLAN ID. If the entry is 0, the entry is not part of a VLAN.
Mac Addr	Displays the next-hop router’s MAC address.
Port	Displays the egress interface. Use the second half of the entry to determine the interface. For example, in the entry 17cl CP, the CP is the pertinent portion. CP = control processor Fo= 40 Gigabit Ethernet interface Te = 10 Gigabit Ethernet interface

Example

Dell#show ip multicast-cam stack-unit 0 port-set 0 10.10.10.10/32
                                             longer-prefixes
                                             Destination    EC    CG    V    C  VId   Mac-Addr        Port
                                             ----------------- -- -- - - ----- -----------------    -------------
                                             10.10.10.10          0     0   1   1 0 00:00:00:00:00:00     3f01 CP
                                             Dell#