Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show file-systems

Displays information about the file systems on the system.

Syntax

show file-systems

Command Modes

EXEC Privilege

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
8.3.17.0	Supported on the M I/O Aggregator.

Example

Dell#show file-systems
                                             Size(b)      Free(b)     Feature Type       Flags Prefixes
                                             2143281152   836874240  FAT32   USERFLASH  rw    flash:
                                             -           -      -   network    rw    ftp:
                                             -           -      -   network    rw    tftp:
                                             -           -      -   network    rw    scp:
                                             Dell#

Command Fields

Field	Description
size(b)	Lists the size in bytes of the storage location. If the location is remote, no size is listed.
Free(b)	Lists the available size in bytes of the storage location. If the location is remote, no size is listed.
Feature	Displays the formatted DOS version of the device.
Type	Displays the type of storage. If the location is remote, the word `network` is listed.
Flags	Displays the access available to the storage location. The following letters indicate the level of access: r = read access w = write access
Prefixes	Displays the name of the storage location.

Related Commands

format flash – erases all the existing files and reformats the filesystem in the internal flash memory.

show file – displays the contents of a text file in the local filesystem.