Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

address family

This command changes the context to subsequent address family identifier (SAFI).

Syntax

address family ipv6 unicast

To remove SAFI context, use the no address family ipv6 unicast command.

Parameters

ipv6	Enter the keyword `ipv6` to specify the address family as IPv6.
unicast	Enter the keyword `unicast` to specify multicast as SAFI.

Defaults

IPv6 Unicast

Command Modes

ROUTER BGPV6-ADDRESS FAMILY

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

After this command is executed, all subsequent commands apply to this address family. You can exit from this AFI/SAFI to the IPv6 Unicast (the default) family by entering the exit command and returning to the Router BGP context.