Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

enable sha256-password

Configure SHA-256 based password for the enable command.

Syntax

enable sha256-password [level level] [ encryption-type] password

To delete a password, use the no enable sha256-password [ encryption-type] password [level level] command.

Parameters

sha256-password	Enter the keyword `sha256-password` then the `encryption-type` or the password.
level level	(OPTIONAL) Enter the keyword `level` then a number as the level of access. The range is from 1 to 15.
encryption-type	(OPTIONAL) Enter the number `8` or `0` as the encryption type. Enter `8` to enter the sha256–based hashed password.
password	Enter a text string, up to 32 characters long, as the clear text password.

Defaults

No password is configured. level = 15.

Command Modes

CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide.

Version	Description
9.10(0.0)	Introduced on the MXL.

Related Commands

show running-config — views the current configuration.
privilege level (CONFIGURATION mode) — controls access to the command modes within the switch.