Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show range

Display all interfaces configured using the interface range command.

Syntax

show range

Command Modes

INTERFACE RANGE (config-if-range)

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Example

Dell(conf-if-range-te-0/6)#show range
                                             interface tengigabitethernet 0/6
                                             Dell(conf-if-range-te-0/6)#

Related Commands

interface — configures a physical interface on the switch.

show ip interface — displays Layer 3 information about the interfaces.

show interfaces — displays information on a specific physical interface or virtual interface.