Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show fcoe-map

Display the Fibre Channel and FCoE configuration parameters in FCoE maps.

Syntax

show fcoe-map

Parameters

None

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.3(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.
9.1.1.0	Introduced on the S5000.

Usage Information

Use the show fcoe-map command to display the FC and FCoE parameters used to configure server-facing Ethernet (FCoE) and fabric-facing FC ports in all FCoE maps on the switch.

In each FCoE map, the values for the fabric ID and FC-MAP that identify the SAN fabric to which FC storage traffic is sent, and the FCoE VLAN to be used must be unique.

An FCoE map is used to identify the SAN fabric to which FCoE storage traffic is sent. It also virtualizes the switch with FC Flex IO module FC ports, so that they appear to downstream server CNA ports as FCoE Forwarder (FCF) ports on an FCoE network.

Example

Dell#show system  stack-unit 0 iom-mode
                                             Unit    Boot-Mode               Next-Boot
                                             ------------------------------------------------
                                             0        standalone             standalone
                                             Dell#show fcoe-map
                                             
                                             Fabric Name        SAN_FABRIC
                                             
                                             Fabric Type        npiv
                                             Fabric Id          1002
                                             Vlan Id            1002
                                             Vlan priority      3
                                             FC-MAP             0efc00
                                             FKA-ADV-Period     8
                                             Fcf Priority       128
                                             Config-State       ACTIVE
                                             Oper-State         DOWN
                                             =======================================================
                                             Members
                                             Fc 0/9 Fc 0/10
                                             =======================================================
                                             =======================================================
                                             Dell#

Related Commands

fcoe-map — creates an FCoE map which contains the parameters used in the communication between servers and a SAN fabric.