跳至主要內容
登出

歡迎來到 Dell

我的帳戶
  • 簡單快速地下訂單
  • 檢視訂單及追蹤商品運送狀態
  • 建立並存取您的產品清單
  • 使用「公司管理」來管理您的 Dell EMC 網站、產品和產品層級連絡人。
登入 建立帳戶 Premier 登入 合作夥伴計畫登入
與我們連絡

您的 Dell.com 購物車

Dell PowerEdge R660 Installation and Service Manual

PDF

Installing the expansion card risers

Prerequisites

  1. Follow the safety guidelines listed in the Safety instructions.
  2. Follow the procedure listed in Before working inside your system.
  3. If removed, install the expansion cards into the expansion card risers.

Steps

  1. Holding the edges or the touch points, align the holes on the expansion card riser with the guides on the system board.
  2. Lower the expansion card riser into place and press the touch points until the expansion card riser connector is fully seated on the system board connector.
    Figure 1. Installing the expansion card riser (Riser 1)
    This image shows how to install Riser 1.
    Figure 2. Installing the expansion card riser (Riser 2)
    This image shows how to install Riser 2.
    Figure 3. Installing the expansion card riser (Riser 3)
    This image shows how to install Riser 3.
    Figure 4. Installing the expansion card riser (Riser 4)
    This image shows how to install Riser 4.

Next steps

  1. If required, re-connect the cables to the expansion card.
  2. Follow the procedure listed in After working inside your system.
  3. Install any device drivers required for the card as described in the documentation for the card.

對此內容評分

準確
實用
易懂
這篇文章對您有用嗎？
0/3000 characters
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  本文章是否有幫助？請選擇。
  評語中不得包含下列特殊字元：<>()\