Dell PowerEdge R660 Installation and Service Manual

Right control panel view

Table 1. Right control panelItem 1 is the power button, indicates if the system is turned on or off. Item 2 is the USB port, enables you to connect USB devices to the system. Item 3 is the iDRAC Direct LED, indicates that the iDRAC Direct port is connected.
Item	Indicator or button	Description
1	Power button	Indicates if the system is powered on or off. Press the power button to manually power on or off the system. NOTE:Press the power button to gracefully shut down an ACPI-compliant operating system.
2	USB 2.0 port	The USB port is 4-pin, 2.0-compliant. This port enables you to connect USB devices to the system.
3	iDRAC Direct (Micro-AB USB) port	The iDRAC Direct (Micro-AB USB) port enables you to access the iDRAC direct Micro-AB USB features. For more information, see the Integrated Dell Remote Access Controller User's Guide at www.dell.com/poweredgemanuals. NOTE:You can configure iDRAC Direct by using a USB to micro USB (type AB) cable, which you can connect to your laptop or tablet. Cable length should not exceed 3 feet (0.91 meters). Performance could be affected by cable quality.

NOTE:For more information about ports, panels, and slots, see the Technical specifications section.