Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell SmartFabric OS10 User Guide Release 10.5.3

PDF

ip pim join-filter

Enables filtering of join and prune messages on an interface. This command prevents the PIM-SM router from creating a state based on a multicast source or group.

Syntax
ip pim join-filter access-list-name
Parameters
access-list-name—Enter the name of the access list. You can specify the ACL name up to 140 characters.
Default
Disabled
Command Mode
INTERFACE CONFIGURATION
Usage Information
Before you configure PIM join filter, ensure that:
  • Multicast is enabled globally using the ip multicast-routing command.
  • The interface is enabled. Use the no shutdown command to enable the interface.
  • The interface is in Layer 3 mode. PIM-SM is enabled only on a Layer 3 interface. Before configuring PIM on the interface, use the no switchport command to change the interface from Layer 2 to Layer 3 mode.

Use the access list to add a range of source and groups for which PIM (*, G) and (S, G) Join/Prune messages must be filtered. If an empty access list is associated with the filter, then all Join/Prune messages are permitted.

Use the no form of this command to remove the access list.

Example 
OS10# configure terminal
OS10(config)# ip access-list acl-join-filter
OS10(config-ipv4-acl)# permit ip 10.10.10.0/24 226.1.1.0/24
OS10(config-ipv4-acl)# permit ip any 225.1.1.0/24
OS10(config-ipv4-acl)# exit
OS10(config)# interface ethernet 1/1/1
OS10(conf-if-eth1/1/1)# ip pim join-filter acl-join-filter
Supported Releases
10.5.2.0 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\