Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell SmartFabric OS10 User Guide Release 10.5.3

PDF

ip radius source-interface

Specifies the interface whose IP address is used as the source IP address for user authentication with a RADIUS server.

Syntax
ip radius source-interface interface
Parameters
interface:
  • ethernet node/slot/port[:subport] — Enter a physical Ethernet interface.
  • loopback number — Enter a Loopback interface, from 0 to 16383.
  • mgmt 1/1/1 — Enter the management interface.
  • port-channel channel-id — Enter a port-channel ID, from 1 to 28.
  • vlan vlan-id — Enter a VLAN ID, from 1 to 4093.
Default
Not configured.
Command Mode
CONFIGURATION
Usage Information
By default, no source interface is configured. OS10 selects the source IP address as the IP address of the interface from which a packet is sent to the RADIUS server. The no version of this command removes the configured source interface.
Example
OS10(config)# ip radius source-interface ethernet 1/1/10
Supported Releases
10.4.3.1 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\