Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell SmartFabric OS10 User Guide Release 10.5.3

PDF

ip pim register-filter

Prevents a PIM source DR from sending register packets to an RP for the specified multicast source and group.

Syntax
ip pim [vrf vrf-name] register-filter access-list-name
Parameters
  • vrf vrf-name—Enter the keyword vrf, then the name of the VRF. If you specify this option, this command applies the filter to specific VRF. Otherwise, it applies the filter to the default VRF.
  • access-list-name—Enter the name of the access list. You can specify the ACL name up to 140 characters.
Default
Disabled
Command Mode
GLOBAL CONFIGURATION
Usage Information
Before you configure a PIM register filter, ensure that Multicast is enabled globally using the ip multicast-routing command.

Use the access list to add a range of source and groups for which PIM register messages must be filtered. If an empty access list is associated with the register filter, then all PIM register messages are permitted.

Use the no form of this command to remove the access list.

Example 
OS10# configure terminal
OS10(config)# ip access-list acl-register-filter
OS10(config-ipv4-acl)# permit ip 10.10.10.0/24 any
OS10(config-ipv4-acl)# exit
OS10(config)# ip pim vrf vrf_dell register-filter acl-register-filter
Supported Releases
10.5.2.0 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\