Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell SmartFabric OS10 User Guide Release 10.5.3

PDF

show ip route

Displays information about IPv4 BGP routing table entries.

Syntax
show ip route [vrf vrf-name] bgp
Parameters
  • vrf vrf-name — Enter vrf and then the name of the VRF to view information that is exchanged between BGP neighbors corresponding to that VRF
Default
Not configured
Command Mode
EXEC
Usage Information
This command displays information about IPv4 BGP routing table entries.
Example 
OS10# show ip route
Codes: C - connected
       S - static
       B - BGP, IN - internal BGP, EX - external BGP
       O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1,
       N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
       E2 - OSPF external type 2, * - candidate default,
       + - summary route, > - non-active route
Gateway of last resort is not set
  Destination        Gateway                     Dist/Metric Last Change
------------------------------------------------------------------------
  C     10.1.1.0/24  via 10.1.1.1  ethernet1/1/17  0/0       01:18:34
  B  IN 100.1.1.0/24 via 10.1.1.2                  200/0     00:03:46
  B  IN 101.1.1.0/24 via 10.1.1.2                  200/0     00:03:46
  B  IN 102.1.1.0/24 via 10.1.1.2                  200/0     00:03:46
  B  IN 103.1.1.0/24 via 10.1.1.2                  200/0     00:03:46
  B  IN 104.1.1.0/24 via 10.1.1.2                  200/0     00:03:46

OS10# show ip route bgp
Codes: C - connected
S - static
B - BGP, IN - internal BGP, EX - external BGP
O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1,
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
E2 - OSPF external type 2, * - candidate default,
+ - summary route, > - non-active route
Gateway of last resort is not set
Destination     Gateway                 Dist/Metric Last Change
---------------------------------------------------------------
B IN 1.1.1.0/24 via 169.254.0.1 vlan100 200/0       00:17:34
Supported Releases
10.4.2.0 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\