Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell SmartFabric OS10 User Guide Release 10.5.3

PDF

tacacs-server host

Configures a TACACS+ server and the key used to authenticate the switch on the server.

Syntax
tacacs-server host {hostname | ip-address} key {0 authentication-key | 9 authentication-key | authentication-key} [auth-port port-number]
Parameters
  • hostname — Enter the host name of the TACACS+ server.
  • ip-address — Enter the IPv4 (A.B.C.D) or IPv6 (x:x:x:x::x) address of the TACACS+ server.
  • key 0 authentication-key — Enter an authentication key in plain text. A maximum of 42 characters.
  • key 9 authentication-key — Enter an authentication key in encrypted format with a maximum of 128 characters.
  • authentication-key — Enter an authentication in plain text with a maximum of 42 characters. It is not necessary to enter 0 before the key.
  • key authentication-key — Enter a text string for the encryption key used to authenticate the switch on the TACACS+ server. A maximum of 42 characters.
Default
Not configured
Command Mode
CONFIGURATION
Usage Information
The authentication key must match the key configured on the TACACS+ server. You cannot enter spaces in the key. The show running-configuration output displays both unencrypted and encrypted keys in encrypted format. Configure the global timeout allowed for authentication requests on TACACS+ servers using the tacacs-server timeout command. By default, OS10 times out an authentication attempt on a TACACS+ server after five seconds. The no version of this command removes a TACACS+ server configuration.
Example 
OS10(config)# tacacs-server host 1.5.6.4 key secret1
Supported Releases
10.4.0E(R2) or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\