Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell SmartFabric OS10 User Guide Release 10.5.3

PDF

show sync-e

Displays the SyncE information and synchronization status.

Syntax
show sync-e
Parameters
None
Default
None
Command Mode
EXEC
Usage Information
Use this command to view the SyncE information such as lock status, selection process state, selected references (primary and secondary), selected QL, and information about each clock sources. The following selection process states are displayed in the output:
  • Selection Process State
    • State 1A: QL-enabled mode, no active switch request.
    • State 1B: QL-enabled mode, active manual switch request.
    • State 1C: QL-enabled mode, active forced switch.
    • State 2A: QL-disabled mode, no active switch request.
    • State 2B: QL-disabled mode, active manual switch request.
    • State 2C: QL-disabled mode, active forced switch request.

To know more about the working states of the clock sources, see Clock source states.

Example - QL-enabled mode 
OS10# show sync-e
QL Mode                             : QL-Enabled
Lock Status                         : Locked
QL Out                              : QL-SSU-A
Selection Process State             : State 1A (QL-enabled and no active switch request)
Primary Reference Interface         : Ethernetl/1/1
Secondary Reference Interface       : Ethernetl/1/2
Selected Reference Clock Identity   : 3c:2c:30:ff:fe:04:05:80 
Local Clock Identity                : d8:9e:f3:ff:fe:ab:47:20 
SSM Network Option                  : Option-1
Hold-off Time                       : 300 ms 
Wait-To-Restore Time                : 300 secs
SyncE Interfaces
----------------------------------------------------------------------
  Interface  Priority  QL          Signal    State       Status
                                   State
----------------------------------------------------------------------
  Eth1/1/1   128       QL -SSU -A   Up       Available   Primary
  Eth1/1/2   128       QL -SSU -A   Up       Available   Secondary
  Eth1/1/3   128       QL -EEC1     Up       Available   -
  Eth1/1/4   128       QL -EEC1     Up       Available   -
----------------------------------------------------------------------
Example - QL-disabled mode 
OS10# show sync-e
QL Mode                           : QL-Disabled
Lock Status                       : Locked
QL Out                            : -
Selection Process State           : State 2A (QL-disabled and no active switch request)
Primary Reference Interface       : Ethernetl/1/2
Secondary Reference Interface     : Ethernet1/1/1
Selected Reference Clock Identity : -
Local Clock Identity              : d8:9e:f3:ff:fe:ab:47:20
55M Network Option                : Option-1
Hold-off Time                     : 300 ms
Wait-To-Restore Time              : 300 secs
SyncE Interfaces
----------------------------------------------------------------------
 Interface Priority   QL   Signal        State              Status
                           State
----------------------------------------------------------------------
 Eth1/1/1     128     -      Up        Available           Secondary
 Eth1/1/2     128     -      Up        Available           Primary
----------------------------------------------------------------------
Supported Releases
10.5.2.1 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\