Dell SmartFabric OS10 User Guide Release 10.5.3

• process-id — (Optional) Displays the router Type 1 LSA for an OSPF process ID. If you do not enter a process ID, this command applies only to the first OSPF process.
• vrf vrf-name — (Optional) Displays the router Type 1 LSA for an OSPF process ID corresponding to a VRF.

• LS age—Displays the LS age.
• Options—Displays optional capabilities.
• LS Type—Displays the LS type.
• Link State ID—Identifies the router ID.
• Advertising Router—Identifies the advertising router’s ID.
• LS Seq Number—Identifies the LS sequence number. This identifies old or duplicate LSAs.
• Checksum—Displays the Fletcher checksum of an LSA’s complete contents.
• Length—Displays the LSA length in bytes.
• TOS—Displays the ToS options. The only option available is zero.
• Metric—Displays the LSA metric.

OS10# show ip ospf 10 database router

       OSPF Router with ID (111.2.1.1) (Process ID 10)

                Router (Area 0.0.0.0)

  LS age: 1419
  Options: (No TOS-capability, No DC, E)
  LS type: Router
  Link State ID: 111.2.1.1
  Advertising Router: 111.2.1.1
  LS Seq Number: 0x8000000d
  Checksum: 0x9bf2
  Length: 60
  AS Boundary Router
   Number of Links: 3

    Link connected to: a Transit Network
     (Link ID) Designated Router address: 110.1.1.2
     (Link Data) Router Interface address: 110.1.1.1
     Number of TOS metric: 0
      TOS 0 Metric: 1

    Link connected to: a Transit Network
     (Link ID) Designated Router address: 111.1.1.1
     (Link Data) Router Interface address: 111.1.1.1
     Number of TOS metric: 0
      TOS 0 Metric: 1

    Link connected to: a Transit Network
     (Link ID) Designated Router address: 111.2.1.1
     (Link Data) Router Interface address: 111.2.1.1
     Number of TOS metric: 0
      TOS 0 Metric: 1