Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell SmartFabric OS10 User Guide Release 10.5.3

PDF

show ip bgp peer-group

Displays information about BGP peers in a peer-group.

Syntax
show ip bgp [vrf vrf-name] peer-group peer-group-name
Parameters
  • vrf vrf-name — (OPTIONAL) Enter vrf to view information about BGP peers in a peer group corresponding to that VRF.
  • peer-group-name — (Optional) Enter the peer group name to view information about that peer-group only.
Default
Not configured
Command Mode
EXEC
Usage Information
  • Peer-group — Displays the peer group name. Minimum time displays the time interval between BGP advertisements.
  • Administratively shut — Displays the status of the peer group if you do not enable the peer group. If you enable the peer group, this line does not display.
  • BGP version — Displays the BGP version supported.
  • Description — Displays the descriptive name that is configured for the BGP peer template. This field displays only when you configure the description.
  • For address family — Displays IPv4 unicast as the address family.
  • BGP neighbor — Displays the name of the BGP neighbor.
  • Number of peers—Displays the number of peers that are configured for this peer group.
  • Peer-group members — Lists the IP addresses of the peers in the peer group. If the address is outbound optimized, an * displays next to the IP address.
Example
MAA-S4048T-X01-7445(config)# do show ip bgp peer-group
Peer-group abc, remote AS 0
BGP version 4
Minimum time between advertisement runs is 30 seconds

For address family: IPv4 Unicast

BGP neighbor is abc, peer-group internal 

Soft-reconfiguration inbound configured

Update packing has 4_OCTET_AS support enabled

Next hop set to self

Max prefix set to 20 with threshold 10 warning only



For address family: IPv6 Unicast

BGP neighbor is abc, peer-group internal 

Soft-reconfiguration inbound configured

Update packing has 4_OCTET_AS support enabled

Next hop set to self

Max prefix set to 20 with threshold 10 warning

Number of peers in this group 0
Peer-group members: 
Example (Summary)
OS10# show ip bgp peer-group ebgp summary
BGP router identifier 32.1.1.1  local AS number 6
Neighbor      AS   MsgRcvd   MsgSent   Up/Down   State/Pfx
17.1.1.2      7    7         6         00:01:54  5  
OS10# show ip bgp peer-group bg1
    Peer-group bg1, remote AS 0
    BGP version 4
    Minimum time between advertisement runs is 30 seconds

    For address family: Unicast
    BGP neighbor is bg1, peer-group external
    Update packing has 4_OCTET_AS support enabled

    Number of peers in this group 2
    Peer-group members:
    40.1.1.2

    ethernet 1/1/1
OS10# show ip bgp peer-group bg1 summary
BGP router identifier 14.233.209.106 local AS number 10
Neighbor           AS       MsgRcvd        MsgSent          Up/Down        State/Pfx
40.1.1.2           20          15             19            00:00:32          0

ethernet 1/1/1     20          15             19            00:00:32          0
Supported Releases
10.2.0E or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\