Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell SmartFabric OS10 User Guide Release 10.5.3

PDF

private-vlan mode (VLAN mode)

Configures PVLAN mode and specifies the PVLAN as primary, community, or isolated VLAN.

Syntax
private-vlan mode {community | isolated | primary}
Parameters
  • community—Configures the VLAN as a community VLAN.
  • isolated—Configures the VLAN as an isolated VLAN.
  • primary—Configures the VLAN as a primary VLAN.
Default
Regular VLAN
Command Mode
VLAN INTERFACE CONFIGURATION
Usage Information
  • Configures a PVLAN as a community, isolated, or primary VLAN. You must not add VLAN members before you configure PVLAN mode.
  • You can add the following port types to community, isolated, and primary VLANs:
    • PVLAN promiscuous to the primary VLAN
    • PVLAN secondary-port to community and isolated VLANs
    • Regular L2 switch ports in Access or Trunk mode to primary, community, and isolated VLANs
  • To change a PVLAN mode, for example, from isolated to community, remove the current PVLAN mode and then configure the new PVLAN mode.
  • If secondary VLANs are mapped to a primary VLAN, remove the secondary-VLAN-to-primary-VLAN mapping before you change the PVLAN mode of the VLANs.
  • The no form of the command configures the VLAN mode back to a regular VLAN. You must remove the VLAN members before you use the no form of the command.
Example—To configure a primary VLAN. 
OS10(config)# interface vlan 10
OS10(conf-if-vl-10)# private-vlan mode primary
Example—To configure an isolated VLAN. 
OS10(config)# interface vlan 20
OS10(conf-if-vl-20)# private-vlan mode isolated
Example—To configure a community VLAN. 
OS10(config)# interface vlan 30
OS10(conf-if-vl-30)# private-vlan mode community
Supported Releases
10.5.2.0 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\