Dell SmartFabric OS10 User Guide Release 10.5.3

LLDP-MED is enabled on all interfaces by default. Configure OS10 to advertise LLDP-MED TLVs from configured interfaces. Define LLDP-MED network policies before applying the policies to an interface. Attach only one network policy per interface.

• Define an LLDP-MED network-policy in INTERFACE mode.

  lldp med network-policy {add | remove} number

  • add — Attach the network policy to an interface.
  • remove — Remove the network policy from an interface.
  • number — Enter a network policy index number, from 1 to 32.

OS10(conf-if-eth1/1/5)# lldp med network-policy add 1